If you want to manually set the overclock the graphics card and to manage the process of cooling the graphics card, you need to enable an additional component Coolbits.
|Warning. Perform the following steps at your own risk.|
Overclocking does not work on all video cards or does it depend on a particular version of the driver. On the proprietary driver installed by default should work without problems. Otherwise, overclocking will not turn on.
1. Open a terminal, copy and run the following commands:
sudo nvidia-xconfig sudo nvidia-xconfig --cool-bits=5
2. Then restart the computer.
3. After a new login open from the system menu NVIDIA X Server Settings and go to Thermal Settings, where you should now see the advanced settings control the rotation speed of the cooling fan on the video card.
4. If something goes wrong, you can always reset thermal settings by clicking Reset to Hardware Default.
cool-bits=1 enables the possibility of overclocking
cool-bits=4 includes the ability to manually control the fan
cool-bits=5 includes both
examples of commands that can be added to autostart every time is not to go into the GUI:
overrides the operating frequencies of the GPU
nvidia-settings-a "[gpu:0]/GPUOverclockingState=1" -a "[gpu:0]/GPU2DClockFreqs=270,162" -a "[gpu:0]/GPU3DClockFreqs=405,324"
set the manual operation of the fun and the rotation speed in percent of maximum
nvidia-settings-a "[gpu:0]/GPUFanControlState=1" -a "[fan:0]/GPUCurrentFanSpeed=62"
You can also play with a [noleech]python script nvidia-fanspeed[/noleech]. There are video instructions. Thank the person who made this video.
May the Force be with you,