First of all I will say is that this method allows to gain remote access not only from Windows but also from any Operating system, to work with your Linux Mint from everywhere.
At least kill me, but I never got to connect to my computer Linux Mint using a standard VNC server "Vino". Given access but to connect failed. In addition nowhere could I find information about this.
In this regard, i will describe installation of third-party x11vnc server.
More importantly, access can be obtained when only works GMD i.e. the user is not logged in. Once it becomes clear that vino (part of Gnome) not suitable for this. The aid comes x11vnc. It pulls vnc4server but it's logical.
So the task:
to provide access to the machine via VNC even if the user is not logged in. To use only one session.
1. Remove vino (to avoid problems with the occupation of the port and the like)
sudo apt-get -y remove vino
2. Install x11vnc
sudo apt-get -y install x11vnc
3. Make the password to access VNC. Here we must be very careful here's why.
By default, VNC doesn't use shh tunnel therefore information
is not encrypted, because if the machine you are very important
and critical need of googling on the subject forward VNC and its ports through an SSH tunnel.
The password is stored in the /home/YOUR USER NAME/.vnc/passwd (where YOUR username is the user name under which you executed the command). It is important to execute this command is not under sudo otherwise there would be problems with access rights for login.
4. The startup service x11vnc. It is very important (to me) that the service was already available at boot X i.e. the user is not logged into the system, but access to the machine already has. To do this, need to have access at the level of GDM.
In some systems use a different welcome screen, not gdm3 therefore this directory is not. For example: Linux Mint 17/16/15/14/13 (MATE) uses MDM. Edit the file /etc/mdm/Init/Default (don't forget to run it as root or sudo otherwise not save the changes):
sudo pluma /etc/mdm/Init/Default
sudo gedit /etc/mdm/Init/Default
Add to the end of the file before exit 0 the following line:
/usr/bin/x11vnc -dontdisconnect -notruecolor -noxfixes -shared -forever -rfbport 5900 -bg -o /var/log/x11vnc.log -rfbauth /home/YOUR USER NAME/.vnc/passwd
From the key parameters should pay attention to the following:-dontdisconnect
- do not disconnect when idle time, which is important if turned sessions window-forever
is a very important parameter. Without it x11vnc
after the session is closed off and more you will not go until ssh again not run it, that is not convenient.-rfbport
- specify on which port will work our VNC (I pointed 5900)
in the manual
dropping (disconnecting from
in to your account
on the computer
screen via VNC. I did that
on my home computer to
multiple accounts. The solution
suggested by our
BENAHLQUIST. It works.
Open the config
sudo pluma /etc/mdm/mdm.conf
sudo gedit /etc/mdm/mdm.conf
Under the [daemon] section, add this line:
Next, save all files and restart the machine.
Then run any VNC client on a foreign computer, such as TightVNC or UltraVNC. Enter your computer's IP and port.
If your computer is behind a NAT forward ports in your router. Enjoy!